Products - Director™ - Multiply the Power of Your Monitoring Tools

Model & Features	DIR-3400	DIR-5400	DIR-7400	DIR-3400P	DIR-6400P	DIR-2400X
CORE FEATURES
10/100/1000 Network Ports	Up to 24	Up to 24	Up to 24	Up to 24	Up to 24	24
10 Gigabit Network Ports	0	2	4	0	3	24
1 Gigabit Monitoring Ports	10	Up to 12	Up to 14	10	Up to 13	Up to 24
10 Gigabit Monitoring Ports	0	2	4	0	3	24
Daisy-Chain
Filtering
Load Balancing	Static	Static	Static	Dynamic	Dynamic	Static
DPI (Deep Packet Inspection)
PERFORMANCE
Max. Throughput	34 Gigabit/s	54 Gigabit/s	74 Gigabit/s	34 Gigabit/s, 10 Gigabit/s over DPI	64 Gigabit/s, 10 Gigabit/s over DPI	240 Gigabit/s
Filters per Chassis	>1000	>1000	>1000	>1000	>1000	>1000
Port Mapping	Aggregation, Regeneration, any-to-any, any-to-many, many-to-any, many-to-any
Device Management	SNMPv3	SNMPv3	SNMPv3	SNMPv3/v2/v1	SNMPv3/v2/v1	SNMPv3/v2/v1 RADIUS, TACACS
Web GUI

Software

Software Management Suite

System Manager

System Manager turns any Windows workstation into an SNMP-compatible management console to monitor and reconfigure all the iTap-enabled devices on your network.

System Manager is a centralized management console that provides access to all of your Net Optics iTap-enabled devices from anywhere within your organization. With System Manger, you can configure devices or check their status instantly, without the time and expense of traveling to the device's physical location.

Flexible Deployment
System Manager can operate over a dedicated management VLAN for maximum security. It operates equally well over the network or Internet, providing remote management from anywhere on the corporate network or in the world.

Provides a central console to manage any number of Director devices
Group devices by type, department, or other criteria
User-friendly GUI interface
View device and link status
Configure Director hardware and filters
Role-based privileges
RADIUS and TACACS+ authentication and authorization
Secured with password and isolated management port
SNMP compatible
Runs on any Windows XP, Windows 98, and Windows 2000 computer or workstation

Web Manager

Web Manager is a Web browser-based management console that enables remote management of Net Optics iTap-enabled devices from anywhere in the world. Web Manger empowers you to configure devices or check their status whether you are in your office, at home, or on the road. Besides convenience, remote management also helps reduce the time and cost spent walking, driving, or flying between buildings and locations to service devices. Simply type the IP address of the device into the address bar of your favorite Web browser to connect to the device as if it was within arm's reach.

Web Manager runs on all of the popular Web browsers including Firefox, Safari, and Microsoft Internet Explorer. Pages are lightweight and load quickly, even over wireless connections. Simple forms make configuring devices easy, and reveal complete device status at a glance.

Task-oriented
Each iTap-enabled device holds the Web Manager page specific to its model type. Whether the task at hand is to check device status, disable a port, or change a connection, Web Manager gets the job done in just a few quick mouse clicks.

Graphical device management interface
Embedded in Director
User-friendly GUI interface
View device and link status
Configure Director hardware and filters
Port names and aliases
Role-based privileges
RADIUS and TACACS+ authentication and authorization
Secured with password and isolated management port
Access from any Web browser including Safari, Firefox, and Internet Explorer

Command Line Interface (CLI)

The command-line interface (CLI) will be familiar to any network administrator. Running over a remote SSH connection or a local RS-232 serial link, the CLI provides visibility and control of every aspect of configuration and operation.